Service Product Catalog
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
The Ninja C chain tool stores inside your handlebar to keep the uncluttered lines of your bike, yet can be easily accessed when you need it. This 11 speed compatible chain tool includes a chain pin compartment, chain hook, and 4mm Allen wrench for easy operation. - Added Features: rivet anvil for 11 speed Campagnolo hollow pin, secondary chain link fence, chain pin breaker, chain pin compartment - Allen Wrench: 4 mm - Body: Lightweight aluminum - Chain Hook: Hardened steel - Chain Tool: Hardened steel - Limitations: Road handlebar with minimum 70mm straight section end, fits inner ø16.5 - ø20 tube - Mount: Handlebar ends - Size: 8.6 x 2.3 x 2.3 cm / 3.4” x 0.9“ x 0.9” (Chain tool), 8.5 x 2.3 x 2.3 cm / 3.3” x 0.9“ x 0.9” (Chain hook) - Speed: Multi-speed chain up to 11 speed hollow pin chain - Weight: 77 g / 2.72 oz
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$7.49 - $18.50
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
$7.99 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
Miracle Red is a 3-in-1 bio-degreaser, hand cleaner and stain remover. - 100% natural, no citrus, pumice or petroleum products - This product will float the grease out of finger prints and will remove grease from white T- shirts like a miracle
$8.95 - $12.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
$7.95 - $9.95
They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
- Protects rotor and calipers from overspray and while in transit - Quick and easy to use, fits all MTB and road rotors - Simply rinse and use again - Breathable neoprene
- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal to metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency
Muc-Off Sweat Protect uses state of the art anti-corrosion additives and inhibitors to provide class leading protection against corrosion. It drives out moisture and leaves a protective anti-corrosive layer on your bike’s frame, metal parts, and paintwork to keep the harmful effects of moisture and sweat at bay. - For use all over indoor trainers and all gym equipment - Non-drying film - Rust preventing / anti corrosion - Integral tracer dye that shows under UV light– aids accurate application to ensure total protection - Protection lasts up to 3 months - Mask braking surfaces before application. Store in a cool, dry place. Do not apply to tyre tread or braking surfaces
Pre-calibrated, torsion-beam-style torque wrench. Machined aluminum construction with removable handle and integrated magnet to hold tool bits in place. 2Nm – 10Nm torque capacity. No preset necessary-simply twist until marker lines up with desired torque setting. Includes soft shell carrying case with storage cutouts. - Weight: 190g Tool Bits - Hex 2, 2.5, 3, 4, 5, 6mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head
$8.99 - $13.49
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.
$7.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
$5.99 - $32.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables - Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
For a thank you from the future you Quickly and easily apply this assembly lubricant to any fastener on your bike to help prevent corrosion and seizing. Your bike (and mechanic) will thank you because we all know that a little assembly lube now can save a lot of elbow grease down the road. Product details - The anti-corrosion and anti-seizing formula is compatible with thread lockers - Precise applicator tip makes it super easy to apply - Pleasing cinnamon scent - Apply directly to any threaded fastener on the bike, usually one drop is enough - 4 fl oz (118mL) bottle is easy to use with a precise applicator tip - Keep out of reach of children and do not ingest
Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38
A compact multi-tool that is designed for integrated storage in compatible Trek road frames. Compact and easily stowed The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry. Product details - Designed for secure integrated storage in the new Domane with storage door - CNC-machined keys for lightweight durability - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Slim profile makes it easy to pack on any ride - Ultralight aluminum alloy design
A high-performance bike wash that’s designed to clean your bicycle gently and effectively to keep it looking its best. So fresh and so clean Superior dirt-lifting and cleaning abilities make Bontrager's Bike Wash the easiest and most effective way to clean your bike. It's formulated specifically for bicycles, so you can save your dish soap for the dishes and your shampoo for the shower. Product details - High-performance bike wash designed for all bikes and all paint finishes - Proprietary formula is Trek's factory-recommended bike wash - Also great for cleaning wheels, tires, and shoes - Pleasing cherry scent - Spray directly on bike, wait to allow it to soak, and clean with soft brush - 32 fl oz (946mL) spray bottle is easy to use and refillable with diluted Bontrager Degreaser - Keep out of reach of children and do not ingest
Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel
A convenient all-in-one pack containing useful tire-change essentials. Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires. Product details - Kit features everything you need to quickly fix a flat, including the seat pack - Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage - Contents include: mini pump, three tire levers, and patch kit - Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube
Fact—tools make work easier. Free up that extra hand during tire stud installation with the Bontrager Tire Stud Tool, featuring a magnetized tip that securely holds the tire stud in place for a quick and easy installation. So grab a beverage of your choice, add some studs to your studdable tires, and ride through the winter's worst. Key features - Magnetized tip securely holds tire stud for easy installation - Use with Bontrager Tire Studs for installation on stud-ready tires
Page 1 of 20 Next page